In this guide, we'll walk you through the step-by-step process of installing laminate flooring and offer some tips to ensure a successful and aesthetically pleasing result. When you?re ready, shop our store for laminate floors in Springfield, IL.?
Steps to installing laminate floors?
Step 1: Gather your tools and materialsBefore you begin, make sure you have all the necessary tools and materials on hand:
- Laminate flooring planks
- Measuring tape
- Saw (circular or miter saw)
- Hammer and tapping block
- Pull bar
- Utility knife
- Safety goggles and knee pads
Step 2: Prepare the subfloorThe subfloor should be clean, dry, and level. Remove any existing flooring and repair any imperfections. Lay down a foam underlayment to provide a moisture barrier and cushioning.
Step 3: Plan the layoutPlan the layout of the laminate planks. Start by measuring the length and width of the room to determine how many planks you'll need. It's important to have a balanced layout, so you don't end up with small, narrow pieces at the edges.
Step 4: Install the first rowBegin installation along the longest wall in the room. Leave a 1/4-inch gap between the planks and the wall to allow for expansion. Insert spacers along the wall to maintain this gap. Install the first row of planks with the tongue side facing the wall.
Step 5: Continue with subsequent rowsFor the second row and beyond, insert the tongue of each plank into the groove of the previous row at a slight angle. Lower the plank to the floor and gently press down until the joints click into place. Use a tapping block and hammer to ensure a snug fit.
Step 6: Cut planks when necessaryWhen you reach the last plank in a row, you'll likely need to cut it to fit. Measure the space, mark the plank, and use a saw to make the cut. Remember to account for the 1/4-inch gap.
Step 7: Maintain proper spacing?Throughout the installation, use spacers to maintain a consistent 1/4-inch gap around the perimeter of the room. This gap allows the laminate to expand and contract with changes in temperature and humidity.
Step 8: Install transition pieces?If your laminate flooring transitions to other flooring types or areas, you'll need transition pieces. These include T-moldings for doorways and threshold transitions for areas like doorways and transitions to different levels.
Step 9: Complete the installationContinue installing the laminate flooring, row by row, until the entire room is covered. Remember to stagger the seams between planks for a more natural appearance. Use a pull bar and hammer to tighten the last rows if needed.
Step 10: Add finishing touches?Once all the planks are in place, remove the spacers and install baseboards or quarter round molding to cover the expansion gap. These finishing touches give the installation a polished look.
Step 11: Clean upClean up the area by removing any debris and sweeping the floor to ensure it's free of dust and dirt.
Embark on your laminate flooring in Springfield, IL??Installing laminate flooring can be a gratifying DIY project that transforms the look of your home. With the right tools, materials, and attention to detail, you can achieve professional-looking results. However, if you're unsure about any step of the process, it's always a good idea to consult professionals for guidance.
If you're ready to embark on your laminate flooring journey, look no further than Flooring of Springfield in Springfield, IL. Our team of experts is dedicated to helping you find the perfect laminate flooring options for your space. Whether you're aiming for a rustic feel or a modern look, our wide range of laminate flooring choices will suit your preferences. Visit our showroom or contact us today to explore our collections and make your dream flooring a reality. Your new laminate floors are just a step away!